Pedrollo water pump with inverter TS1-4CP 100 0.75kW 230V
TISSEL 100 are compact pumping units composed by a centrifugal pump with an integrated speed regulator (inverter) complete with a pressure sensing device built-in.
Sturdy and very easy to use. They are the perfect solution to get a constant pressure in every tap of the system.
The inverter is a water cooled type, and has an IP 65 protection grade. It receives a single-phase alternate voltage (230±10% V - 50/60 Hz) and supplies a three-phase alternate output voltage which supplies the motor of the pump with an IE3 performance class.
The wear of the water pump components is reduced due to the low speed of the motor during its duty life and it is progressively started and stopped.
ENERGY SAVINGS
A significant energy savings in terms of low flow rates. It is like running a lower power pump.
PROTECTIONS
- Dry running protection.
Stops the pump after a few seconds and tries to resume at intervals of time in order to check whether the water is present or not in the system.
- Running with a pressure inferior than the minimum pressure set.
Stops the pump after a few seconds (for example, when a pipe is broken).
- Currents – Voltages - Temperatures.
Limits the currents; complete with an alarm for out-of-limit voltages; protects from over-temperature and short-circuit between the output phases.
Liquid type: Clean Water
Uses: domestic, civil
Applications: water supply systems, pressure systems, irrigation pumps
typology: electric pumps with inverter
Family: centrifugal
Performance Range:
- Flow rate up to 160 l/min (9,6 m³/h)
- Head up to 62 m
Application Limit:
- Temperature of the liquid to +40 °C
- Ambient Temperature to +40 °C
- Maximum liquid temperature:
+40 °C TS1-4CP 100, TS1-5CR 100
+55 °C TS1-2CP 25/130, TS1-2CP
- Manometric suction lift up to 7 m
- Max. working pressure:
6 bar TS1-4CP 100, TS1-2CP 25/130
7 bar TS1-5CR 100, TS1-5CR 100
- Continuous service S1