LEO pump without hydrophore XST40-125/15 1.5kW 380V

LEO.COM

XST centrifugal pump (monoblock) – the pump is connected to an electric motor

Max. productivity (m3/h): 27
Voltage, V: 380
Max. lifting height (m): 18.1
Engine power (kW): 1.5

FEATURES AND AREAS OF USE

XST centrifugal pump (monoblock) – the pump is connected to an electric motor.
Design features:
– Centrifugal pump with one impeller with axial intake and radial exhaust
– Connections DN according to EN 733 (ex DNI 24255） and UNI 7467)
– Flanges according to UNI 2236 and DIN 2532
– The impeller, the motor can be removed without disconnecting the pump from the pipes
– Fluid temperature: 10 to 85 ℃
- Max. working pressure: 12 bar (PN12)
– Impeller: AISI 304 / HT 200, housing: cast iron
– Mechanical seal according to DIN 24960
– Motor insulation class: F
– Protection class: IP 54
– Operation according to CEI 2-3 (IEC 34.1)
- Max. ambient temperature: + 40 ℃
– Overload protection

Areas of use:

– Pumping clean, chemically non-aggressive water and other liquids
– Water supply and irrigation
– Water circulation in air conditioning systems

TECHNICAL SPECIFICATION DATA

Electrotechnical

Power used - P: 1500 W
Power grid frequency: 50 Hz
Nominal voltage: 3 x 380 V
Protection class IP 54
Insulation class F
Hydraulic

Maximum output: 27.0 m³/h (450 l/min)
Maximum lifting height: 18.1 m
Maximum suction height: 7 m
Maximum working pressure: 12 bar
Materials

Pump housing: Cast iron
Working wheel: Cast iron
Shaft seal: mechanical

Others

Ambient temperature range: 0 .. 40 °C
Fluid temperature range: from -10°C to +85°C
Pipe connections (inlet/outlet): 65/40 mm