LEO centrifugal garden water pump LKJ-801P 0.8kW 230V
MAX. PERFORMANCE (M3/Hour): 3.6
VOLTAGE, V: 230
MAX. LIFTING HEIGHT (M.): 40
ENGINE POWER (KW): 0.8
WARRANTY (MONTHS): 24
CHARACTERISTICS AND FIELDS OF APPLICATION
The device is suitable for household water supply and equipment, lifting water from a well, creating pressure in a pipeline, watering in greenhouses and gardens, fishing and agricultural purposes, etc.…
It is designed to pump clean water and other non-corrosive low viscosity liquids. It must not be used for pumping flammable, explosive, gaseous liquids or liquids containing solid particles or fibers. Water pH range: 6.5 to 8.0.
Note:
The pumps in this series can be converted to automatic water pumps using an external automatic device consisting of a pressure switch, a pressure vessel, and so on. The principle of operation of the automatic pump is as follows: when the power supply is switched on and water is started, the pump will start automatically, and when you stop using the water (turning on the tap), the pump will stop automatically. If the automatic pump is used with a water tower, it is necessary to connect water level sensors in order for the pump to start or stop automatically, depending on the water level in the tower.
DETAILS OF TECHNICAL SPECIFICATIONS
Electrotechnical
Power consumption P [W] 800
Voltage [V] 1 ~ 220-240 AC
Mains frequency [Hz] 50
Hydraulic
Maximum capacity [l / h] 3600
Maximum lifting height [m] 40
Maximum suction height [m] 8
Kiti
The material of the pump housing is plastic
Impeller material - plastic
Device protection class [IP] IPX4
Pumped liquid: water (PH 6.5-8.0)
Liquid temperature [° C] + 0 / + 35
Maximum ambient temperature [° C] +40
Insulation class of windings: F
Intake / exhaust connections: 25/25 mm (1 ″ / 1 ″)
Weight [kg] 8.5